General Maintenance - Promeba PS-251 User Manual

Evacuation chair
Hide thumbs Also See for PS-251:
Table of Contents

Advertisement

USER GUIDE //
EVACUATION CHAIR PS-251
Review 2021/07
04

GENERAL MAINTENANCE

CLEANING
It is essential to keep the equipment clean to ensure a proper use and durabi-
lity of the set. A thorough clean must be done periodically, especially in areas
exposed to dirt that may be damaged such as gears or mobile elements.
Do not use high-pressure cleaning systems, neither bleach to disinfect the
product, they can damage it. Instead, use a hydroalcoholic based disinfectant,
wash with water and let it dry naturally, do not use sources of direct heat to dry.
MAKE SURE TO KEEP AREAS FROM FIGURES ON THE RIGHT FREE OF WATER AND
HUMIDITY. TAKE SPECIAL CARE NOT TO GET THEM WET WHILE WASHING THE
SET.
MOBILE ELEMENTS
Due to the intense and continuous use of mobile elements such as levers or
commands, periodically examine its proper operating.
Inspect the mechanical connections that may exist.
LUBRICATE
Generally, all moving parts must be lubricated. Our products leave the factory
completely lubricated. However, it is possible that the elements lose lubrica-
tion with the passage of time and the use of the product, either due to loss of
lubricant or dirt.
Periodically clean and lubricate affected areas.
Check for loose, missing or worn parts. Periodically inspect all moving parts to
ensure components are tight.
WEAR AREAS
Inspecting regularly on the system components for signs of wear is a preven-
tive measure that can reduce breakdowns. Check possible lubricant leakages,
grooves or bearing in poor condition.
MECHANICAL FIXING
We call mechanical fixing elements to the components used to fix the product
as a whole, mainly screws and derivatives.
To some terms of use, due to vibrations or impacts, certain elements may lose
their tightening torque or fixing properties. Periodically review that there are
no loose elements, especially on moving parts. Please note and always respect
the recommended tightening torques.
REPLACEMENT OF COMPONENTS
In the event that certain mechanical parts need to be replaced by qualified
service personnel, they should contact our sales department for more informa-
tion on ordering spare parts and their installation.
MAINTENANCE SUMMARY
DISINFECT
CLEAN
INSPECT
LUBRICATE
SPRINGS REPLACEMENT
WHEELS REPLACEMENT
18
EVERY USE
WHEN NEEDED
X
X
X
X
EVERY MONTH
EVERY YEAR
X
X
X
EVERY 4 YEARS
X

Advertisement

Table of Contents
loading

Table of Contents