Configuring Your Remote Control; Manual - JVC LT-42DS92J Instructions Manual

Configuring your remote control

You can configure your TV's remote control to operate your other
devices.
Configure your remote control.
1
Turn on the device manually.
2
Switch the remote control mode to a mode that
matches your device. Refer to the table on the
right to select an appropriate mode.
The indicator lights for 3 seconds each time the remote
control is operated.
3
Find the remote control code for your device
according to its brand from the "Remote control
codes" list. (Refer to P. I - X at the back of this

manual.)

4
Set the remote control code.
Press and hold
LCD
The indicator will unlit for a second after entering the four
digit remote control code number.
TV STB
AUDIO DVD
Release the button
Enter four digit
number
5
Point the remote control at your device, press
and confirm that your device is turned off. If your
device does not respond, try entering another
available code.
Note
If your device does not respond, try all the available codes for
the device's brand.
If none of the code works, or the brand is not listed, refer to
"Using the search code function" (P. 25).
MODE
TV This TV only
Cable Set Top Box, Cable/PVR Combination,
STB
Satellite Set Top Box, SAT/PVR Combination
DVD, Blu-Ray DVD, HD DVD, DVD-R, Home
DVD
Theater in Box, TV/DVD Combination
AUDIO Amplifier, Receiver, Home Theater in Box
Applicable devices
24