Adjusting The Working Depth Of The Front Section - Farmet FALCON 3 Operating Manual

Manual
FALCON 3 | 4 | 6 | 8

15.5 ADJUSTING THE WORKING DEPTH OF THE FRONT SECTION

The working depth of the front preparatory section is set using spacers on the piston-rod for lifting that are
placed on the piston rod. The depth always corresponds to the combination of the individual spacers, see Table
and the sticker on the machine.
It is important that the working depth of the front section never exceeds the required sowing depth for ideal
operation of the machine.
Picture 60 – Setting the depth of the front section
Front section piston-
rod
70 │ 99
Front section spacers