DeWalt DCN681 Original Instructions Manual page 37

Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCN681 operates on a 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB546,
DCB547. Refer to Technical Data for more information.
Package Contents
The package contains:
1 Stapler
3 Non-mar tips
1 Charger
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3 models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
nOTE: N and NT versions are not supplied with batteries or
a charger.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
WALT batteries with a
e
Wear ear protection.
Wear eye protection.
Do not operate tool on scaffoldings, ladders.
Length of staples.
Staple gauge.
Magazine capacity.
Tool voltage.
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The date code 18 , which also includes the year of manufacture,
is printed on the tool foot between the face of the battery and
the stapler.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger
1
Trigger lock-off
2
Depth adjustment wheel
3
Headlights/Low battery/
4
Stall indicator
Contact trip
5
Sliding magazine
6
Bump/Sequential
7
selector switch
Intended Use
Your cordless stapler has been designed for driving staples into
wooden workpieces.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your cordless stapler is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
EngLIsh
Reversible belt hook
8
No-mar pad
9
No-mar pad storage
10
Stall release lever
11
Staple depth indicator
12
Battery
13
Battery release button
14
Magazine latch
15
Low staple indicator
16
35