DeWalt DW152 Original Instructions Manual page 23

– Risk of personal injury due to flying particles.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (p), which also includes the year of
manufacture, is printed into the housing.
Example:
2009 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Drill
2 Side handles
1 Breast plate (with fixing bolt)
1 Drift wedge
4 Hexagonal screws
1 Mixing adaptor (DW152)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Lock-on button
c. Forward/reverse slider
d. Two gear selector
e. Carrying handle
f. Threaded side handle (also serving as drift
wedge holder)
g. Control side handle (with additional on/off
switch [a])
h. Tool holder
i. Drift wedge
j. Drift wedge slot
k. Gear housing
l. Breast plate
m. Carbon brush access cover
INTENDED USE
Your DW152 has been designed for professional
heavy duty drill applications.
– DW152 drill: heavy-duty mixing, thread tapping
and drilling.
The tool can be mounted on a drill stand for use as
a stationary tool.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These rotary drill is a professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
EN GL IS H
21