EN
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part,
please contact your reseller. On the separately
enclosed spare parts list you can find an overview
of the parts that can be ordered.
Malfunctions
The electric motor is getting hot.
•
The motor is being overloaded by workpieces
that are too big.
•
Saw at a lower speed so that the motor
can cool down.
•
The motor is defective.
•
Please contact your reseller.
The appliance does not work.
•
Check the mains connection for faults.
•
The mains connection has been broken.
•
The switch is damaged.
•
Please contact your reseller.
it is very difficult to move the workpiece along
the saw blade in a straight line and the saw
cut is uneven.
•
The saw blade is warped or blunt.
•
Replace the saw blade.
The workpiece is starting to vibrate violently
during sawing.
•
The saw blade is overheated or distorted.
•
Replace the saw blade.
The appliance runs noisily and/or very
unevenly.
•
The carbon brushes are worn.
•
Please contact your reseller.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
38
Warranty
Warranty conditions and product liability apply
according to national legislation.