Operation
Manual
Remote-control unit
TEMP
ON
OFF
HEALTH
1
5
MODE
SLEEP
CLOCK
TIMER
LIGHT
RESET
SWING
TEMP
Manual
Remote
controller
FAN
4
SWING
SET
HEAT
LOCK
1
Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,
2
operation mode changes as follows:
AUTO COOL
AUTO COOL
Select cooling operation, Shows"
Cooling operation starts.
3
Select temp. button
Press TEMP button
Every time the button is pressed, temp.
setting increases 1 C
Every time the button is pressed, temp.
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly.
Press FAN button. For each press, fan speed
4
changes as follows:
Remote
LOW
controller
Manual
find it in page 15
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed outomatically
according to the indoor temperature.
Press ON/OFF button
5
Unit stops running,and when entry this mode for the
next time,it will show the previous setting.
7
Cooling
DRY
FAN
HEAT
DRY FAN
HEAT
"
MID
HIGH
AUTO