Vacuum Settings - Sun Microsystems BLIZZARD Qtech III Instruction Manual

VACUUM SETTINGS

Allows to modify the default vacuum time and the default time of check.
From the SETUP, select VACUUM SETTINGS, default setting is displayed:
Each value can be modified, within the values shown in parentheses.
NOTE: press INFO to restore default values:
 Vacuum time
 Time of check
 Vacuum rising
INSTRUCTIONS MANUAL
R134a
VACUUM SETTINGS
Pressing INFO set default values
Vacuum Time
Time of check
Vacuum rising
VACUUM SETTINGS
25 min
2 min
0,1 mbar
-67-
SETUP