Edit Gas Filling Mode; Start Procedure - Sun Microsystems BLIZZARD Qtech III Instruction Manual

Gas filling lower than 100 grams is not allowed, press OK then digit an higher amount of gas
filling.

Edit GAS FILLING mode

Select the connection mode:
- HP+LP fill the refrigerant from both HP and LP service ports
- HP to fill the refrigerant only from the HP service port,
- LP to fill the refrigerant only from the LP service port,

START procedure

After selected all the procedure data, press OK to continue, the following screen will be
displayed:
Type the plate of the car, press OK to confirm. BACK to return back.
NOTE: the numerical keys include an alphabet that is used similar to text messaging; for
example: press "2" once to display "A", twice to display "B", three time for "C", four time for "2".
Connect and open the coupling (HP, LP, or HP/LP, depend of the previous choice) connected
to the A/C system, then press OK, press BACK to return back.
INSTRUCTIONS MANUAL
R134a
WARNING !
Gas filling quantity
Less than 100g
Press OK to continue
OIL + UV INJECTION
R134a
Inset vehicle
Plate number:
OIL + UV INJECTION
R134a
Connect and open HP and LP coupling to A/C
system press OK
OIL + UV INJECTION
R134a
OIL INJECTION
-46-
MANUAL PROCEDURE
MANUAL PROCEDURE
MANUAL PROCEDURE
MANUAL PROCEDURE
Oil Injected