Change Oil/Uv Container - Sun Microsystems BLIZZARD Qtech III Instruction Manual

CHANGE OIL/UV CONTAINER

This procedure is needed when changing oil, to remove traces of previous oil from the pipeline.
From MAINTENANCE, select CHANGE OIL/UV CONTAINER, the following screen will be
displayed:
Select container to substitute, then press OK, the following screen will be displayed:
Make sure that HP and LP coupling are disconnected from A/C system or else and press OK:
Remove the old container and replace it with the newer one already filled, then press OK to
begin oil drain procedure, the following screen will be displayed:
After some minutes, at the end of the operation the following screen will be displayed:
INSTRUCTIONS MANUAL
R134a
CHANGE CONTAINER:
OIL container
UV container
CHANGE OIL/UV CONTAINER
R134a
Make sure that HP and LP
coupling are disconnected from
A/C system or else
Press OK to continue
CHANGE OIL/UV CONTAINER
R134a
Remove the old container and
replace it with the newer one
already filled
Then press OK
CHANGE OIL/UV CONTAINER
R134a
Change OIL/UV container in progress
Change OIL/UV container
CHANGE OIL/UV CONTAINER
-103-
MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE