Technical Data - WellerFT Zero Smog 2 Translation Of The Original Instructions

Technical Data

Solder fume extraction
Dimensions L x W x H (mm)
Weight (kg)
Mains supply voltage (V/Hz)
Electrical power rating (VA)
Maximum vacuum (Pa)
Maximum quantity supplied (m³/h)
Pre filter
Combined filter
Original declaration of conformity
Solder fume extractor Zero Smog
We hereby declare that the products described
herein comply with the following guidelines:
2011/65/EU (RoHS), 2014/30/EU, 2006/42/EG
Applied harmonised standards:
EN 60 335-1: 2012-10
EN 60 335-2-45: 2012-08
EN 62233: 2008-11/2009-04
EN 55 014-1: 2012-05
EN 55 014-2: 2009-06
EN 61 000-3-2: 2010-03/2011-06
Symbols
Caution!
Read the operating instructions!
Before performing work of any kind
on the unit, always disconnect the
power plug from the socket.
ESD-compatible design and
ESD-compatible workstation
CE mark of conformity
14
Zero Smog 2
360 x 330 x 415
9
FT91004699:
230 / 50
Zero Smog 2
120 / 60
185
3.000
190
Medium filter M5 collects 40-60% fine dust > 1 mm.
Combined E12 high efficiency submicron filter ((99.95 % particle
separation upto 0.12 μm))
in combination with an activated carbon filter
EN 61 000-3-3: 2014-03
EN 50 581: 2013-02
Besigheim, 14.11.2014
B. Frühwald
Managing director Technical director
Authorised to compile technical documentation.
Weller Tools GmbH
Carl-Benz-Straße 2, 74354 Besigheim, Germany
T. Fischer
Disposal
Do not dispose of electric tools together
with household waste material! In obser-
vance of European Directive 2012/19/EU
on waste electrical and electronic equip-
ment and its implementation in accordance
with national law, electric tools that have
reached the end of their life must be collec-
ted separately and returned to an environ-
mentally compatible recycling facility.
Contaminated filters must be treated
as special waste.
Dispose of replaced equipment parts, filters
or old devices in accordance with the rules
and regulations applicable in your country.