Victron energy VE.Net Manual page 34

Advanced menu
Active AC input
DC voltage RMS
PMC present
Device type
Software version
IDC (invert)
IDC (charge)
†Redetect system
Device specific menu
DC current
Mains AC voltage
Mains AC current
Mains AC power
Mains frequency
Inv. AC voltage
Inv. AC current
Inv. AC power
Inv. frequency
28
Information The currently active A.C. input (or the last
active input if there is currently no mains
supply).
Information Displays the measured ripple voltage of the
D.C. input.
Information A Phoenix Multi Control (or other remote
panel) has been detected.
Information The type of target device connected.
Information The software version of the target device.
Information The total current drawn from the battery by all
inverting phases.
Information The total current supplied to the battery by all
charging phases.
Setting Redetect the supported features and
parallel/multi-phase configuration of the
system.
Information The D.C. current between the battery and the
selected device.
Information The voltage of the mains supply to the
selected device.
Information The current drawn from the mains supply by
the selected device.
Information The power being consumed from the mains
supply by the selected device.
Information The frequency of the mains supply to the
selected device.
Information The voltage being produced by the inverter of
the selected device.
Information The current drawn from the inverter of the
selected device.
Information The power consumed from the inverter of the
selected device.
Information The frequency of the inverter output of the
selected device.