Safety Notes - Bosch Intuvia eShift Supplement To Original Operating Instructions

Code Ursache
592 Inkompatible Komponente
593 Konfigurationsfehler
595, 596 Konfigurationsfehler
7xx Getriebefehler
English
Supplement to original operating
instructions

Safety Notes

Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious in-
jury.
Save all safety warnings and instructions for future refer-
ence.
Read the safety warnings and instructions in the operat-
ing instructions of the drive unit/on-board computer, bat-
tery and charger as well as in the operating instructions of
your eBike.
Intuvia eShift information menu
eShift with NuVinci H|Sync
The information menu for integrating the NuVinci H|Sync con-
tinuously variable automatic transmission is as follows.
Information menu
– "Clock": Current time
– "Max. speed": Maximum speed achieved since the last
reset
– "Avg. speed": Average speed achieved since the last reset
– "Trip time": Trip time since the last reset
– "Range": Estimated range of the available battery-pack
charge (for constant conditions such as assistance level,
route profile, etc.)
– "Odometer": Display of the total distance travelled with
the eBike (cannot be reset)
– "NuVinci Cadence/Gear": Press the "i" button for more
than 1 s to access the NuVinci menu item from any menu
item in the information menu.
To switch from the "NuVinci Cadence" mode to the
"NuVinci Gear" mode, press the "i" button for 1 s.
To switch from the "NuVinci Gear" mode to the "NuVinci
Cadence" mode, all you have to do is briefly press the "i"
button. The default setting is "NuVinci Cadence".
Bosch Power Tools
Abhilfe
Kompatibles Display einsetzen. Falls das Problem weiterhin besteht,
kontaktieren Sie Ihren Bosch eBike-Händler.
Starten Sie das System neu. Falls das Problem weiterhin besteht, kon-
taktieren Sie Ihren Bosch eBike-Händler.
Überprüfen Sie die Verkabelung zum Getriebe und starten Sie das Sys-
tem neu. Falls das Problem weiterhin besteht, kontaktieren Sie Ihren
Bosch eBike-Händler.
Bitte beachten Sie die Betriebsanleitung des Schaltungsherstellers.
Range
In the "Cadence" mode you can use the "–" or "+" button
on the operating unit to increase or decrease the desired
cadence. If you hold down the "–" or "+" button, the ca-
dence will increase or decrease in steps of five. The de-
sired cadence is shown on the display.
In the "Gear" mode you can use the "–" or "+" button on
the operating unit to switch back and forth between sever-
al defined transmission ratios. The engaged transmission
ratio (gear) is shown on the display.
– "Trip distance": Distance covered since the last reset
eShift with SRAM DD3 Pulse
The gear hub of the SRAM DD3 Pulse works on a speed-de-
pendent basis. Regardless of which gear is engaged on the de-
railleur gears, one of the three gears of the gear hub will auto-
matically be engaged.
The engaged gear will be shown briefly on the display whenev-
er the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
The information menu for displaying the engaged gear of the
gear hub is as follows.
Information menu
– "Clock": Current time
– "Max. speed": Maximum speed achieved since the last
reset
– "Avg. speed": Average speed achieved since the last reset
– "Trip time": Trip time since the last reset
– "Range": Estimated range of the available battery-pack
charge (for constant conditions such as assistance level,
route profile, etc.)
– "Odometer": Display of the total distance travelled with
the eBike (cannot be reset)
– "Gear": Currently engaged gear of the automatic gear hub
is displayed.
– "Trip distance": Distance covered since the last reset
odometer (+/-) NuVinci Cadence
(1 s)
(1 s)
(+/-) NuVinci Gear
X 275 007 BAI | (23.1.15)
| 3