Maintenance - Haier AB092ACBJA Operation And Installation Manual

Maintenance

Clean the unit
Turn off the power supply switch
ON
OFF
Take down air inlet grille
As the figure, press the two locks on air inlet grille
vertically, and make it move to grille, then rise
it up 45 degree gently to take out the grille.
Take down the filter
Press the outside two edges of inlet grille with
the thumbs, and pull out the filter corner with the
forefingers, to rise the filter up after it moves
away from the locks, then take out the filter.
Clean the air filter
Clean the air filter with water or vacuum cleaner.
Use the detergent or neutral soapy water if the
air filter is too dirty. Then rinse the air filter with
water,and reinstall after it isdry.
Caution:
Do not clean the air filter with hot water over 40 C,
otherwise may damage the filter.
Sweep the filter carefully.
Clean indoor/outdoor unit
Clean with hot wet cloth and neutral detergent, then wipe with
dry cloth.Do not use too hot water (over 40 C) which may result
in fading and deforming. Do not use insecticide and chemical
washing agent.
Do not touch with wet hand.
Fixing nolt
filter corner
8
Do not use hot water or volatile liquid
press the locks
lock
grille edge
take out the grille