Blackmagicdesign Teranex Series Installation And Operation Manual page 358

Command
Chroma high:
Aspect fill luma:
Aspect fill Cb:
Aspect fill Cr:
Video Advanced
Command
Clean cadence:
Scenecut detect:
Source type:
FRC aperture:
Processing:
Video Input
Command
Auto detection enabled:
Auto detection prefer PsF:
Video source:
Video mode:
Audio source:
PCIe mode:
Command Description
Set chrominance high level value to clip overshoots.
Range is 5 to 1019 (Default = 1019)
Set luminance (Y) value for letterbox or pillarbox fill color.
Range is 64 to 940 (Default = 64)
Set B-Y value for letterbox or pillarbox fill color.
Range is 64 to 960 (Default = 512)
Set R-Y value for letterbox or pillarbox fill color.
Range is 64 to 960 (Default = 512)
Command Description
Enable Clean Cadence processing. False = OFF;
True = ON (Default = False)
Enable scene cut detection. False = OFF;
True = ON (Default = True)
Values are: Auto, Video, Film
Values 0, 1, 2, 3.
This command sets the processing latency in the Teranex AV only.
Values are: Lowest Latency, Highest Quality.
Command Description
Provides auto-detection of the input video format. Must ALWAYS be
set to True. A setting of False will produce incorrect operation of the
device.
Cannot be changed by the user.
Select the video input type. Values are model dependent.
Teranex 2D: SDI, HDMI, Composite, Component.
Teranex 3D: SDI, HDMI, Composite, Component
Teranex Express: SDI, Optical.
Teranex AV: SDI1, SDI2, HDMI, Optical.
Displays the current input video format.
Cannot be changed by the user.
Select the audio input type. Values are model dependent.
Teranex 2D: Embedded, AES, RCA, DB25.
Teranex 3D: Embedded, AES, RCA, DB25.
Teranex Express: Embedded.
Teranex AV: Embedded, AES, RCA, DB25.
For Teranex 2D and 3D: Display the status of the Thunderbolt
connection. Values are: Capture, Playback, None.
Cannot be changed by the user.
Informations pour les développeurs 358 358