USER GUIDE //
CHAIR PS-251 + POWER TRACK PA-260 + LOCKING SYSTEM PA-281
Review 04/20
03
INSTALACIÓN
03.4
Start up of the track PA-260
To start using the power track, it is necessary to charge the battery. To do this, locate the external socket
with female connector 2.1, located on the back of the track as shown in the picture (A).
If you have the PA-270 support and its installation and you have requested the PA-260 track with inte-
grated load, you can start loading the track as shown in the image (B), place the track on the stand and
start charging automatically.
Always charge the battery up with the charger supplied by PROMEBA to its maximum charge level
(approx. 60min. are enough).
A
B
Only charge the batteries of the stretcher with the charger supplied by PROMEBA, otherwise it could
damage the batteries and you will lose their warranty.
External charger for PROMEBA battery.
High performance battery for PROMEBA power track.
17