Pioneer HTP-500 Operating Instructions Manual page 51

Listening to your system
Setting What it does
HDMI
Specifies the routing of the HDMI audio signal out of
(HDMI Audio) this system (amp) or through to a TV or flat screen TV.
When THRU is selected, no sound is output from this
system.
A.DLY This feature automatically corrects the audio-to-video
(Auto Delay) delay between components connected with an HDMI
cable. The audio delay time is set depending on the
operational status of the display connected with an
HDMI cable. The video delay time is automatically
adjusted according to the audio delay time.
g Spreads the center channel between the front right
C.WIDTH
and left speakers, making it sound wider (higher
(Center Width)
settings) or narrower (lower settings).
(Applicable only
when using a center
speaker)
g Adjusts the surround sound balance from front to
DIMEN.
back, making the sound more distant (minus
(Dimension)
settings), or more forward (positive settings).
g Extends the front stereo image to include surround
PNRM.
speakers for a 'wraparound' effect.
(Panorama)
h Adjust the center image to create a wider stereo effect
C.IMG
with vocals. Adjust the effect from
(Center image)
channel sent to front right and left speakers) to
(Applicable only
(center channel sent to the center speaker only).
when using a center
speaker)
a. You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.
b. You can change the Sound Retriever feature at any time by using S.RETRIEVER button.
c. WMA and MP3 playback available only via iPod/USB input.
d. This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
e. The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than
Dolby TrueHD.
f. This feature is only available when the connected display supports the automatic audio/video synchronizing
capability ('lip-sync') for HDMI. If you find the automatically set delay time unsuitable, set A.DLY to OFF and
adjust the delay time manually. For more details about the lip-sync feature of your display, contact the
manufacturer directly.
g. Only available with 2-channel sources in DOLBY PLII MUSIC mode.
h. Only when listening to 2-channel sources in NEO:6 CINEMA and NEO:6 MUSIC mode.
Option(s)
AMP
THRU
OFF
ON
f
0 to 7
Default: 3
–3 to +3
Default: 0
OFF
ON
0 to 10
(all center Default: 3
0
10 (NEO:6 MUSIC),
10 (NEO:6 CINEMA)
07
51
En