HTC Snap User Manual page 146

146 Camera and Multimedia
Option
Prefix
Counter
Flicker Adjustment
Template Folder
(Picture Theme
mode only)
Show Reminder
(Contacts Picture
mode only)
Recording Limit
About
Allows you to
Set a prefix to image or video filenames.
When Default is selected as the prefix, the filename of each new
captured file is set to "IMAGE" or "VIDEO" followed by a sequential
number, for example: IMAGE_001.jpg. You may also choose to prefix
filenames using either the current Date or Date & Time.
Note: If you set the Camera to save captured photos to a storage card,
the prefix cannot be selected. Captured photos will be named using
the DCIM (Digital Camera Images) naming standard.
Select Reset to reset the naming counter to 1.
When taking indoor shots, flicker on the camera screen may be caused
by interference from fluorescent lighting. To reduce flicker, change the
flicker adjustment setting to Auto or to the proper frequency (50Hz or
60Hz) of the country where your phone is being used.
By default, templates are stored in the \My Documents\Templates
folder on the phone's main memory. If you transferred some templates
to a storage card (using File Explorer), set this option to Main + Card
to specify that templates are located in both the main memory and
the storage card.
Select On to be prompted to set the picture to a contact after taking a
contact picture. Select Off to disable the prompt.
Specify the maximum time or file size for recording video clips.
Display the Camera's firmware information.