Philips HB953 Manual page 13

Choose symbol • and ª if you want to tan your whole body and give
your face an extra tan.
Choose º if you want to tan just a part of the body (types HB952 and
HB953 only).
Choose symbols ª and º if you want to tan just a part of the body,
including an extra facial tanning (types HB952 and HB953 only).
Note: In these directions for use, functions ; ª are used as examples
of what may be shown on the display.
Setting the time for a tanning session
C
1 Set the time of the tanning session by pushing the + button to
put the time forward or by pushing the - button to put the
time backward.
Keep the button pressed in to adjust the time more quickly.
2 Lie down directly under the lamp units of the appliance to
ensure that the sides of your body are also tanned properly.
3 Put on the protective goggles provided.
C
Switch on the tanning lamps by pressing the start button ∞.
4
Note: During start-up the tanning lamps may produce a humming sound.
B
This sound will stop as soon as the lamps are burning properly.
Note:The tanning lamps will start to emit a visibly stronger light after
B
about 20 seconds, which means they are now burning at full power. From
this moment onwards you can switch the facial tanner on or off.
Note: If the lamps fail to go on after about 20 seconds, switch the
B
appliance off (∞), let the lamps cool down for 3 minutes, set the tanning
time and switch the appliance back on again (∞).
C
A blinking signal will appear; the set time is shown on the display
(25 minutes in this case).
The countdown of the set tanning time will now start.
C
You can switch the facial tanner (• , ª) on or off during the
session without having to switch off the whole appliance.
(This also holds for the extra face tan in combination with º).
B
The chosen symbols stay visible in the display, but the other symbols do
not.
ENGLISH
13