Storing A Number Of The Caller Id List Into The Phone Directory - Sony SPP-A700 Operating Instructions Manual

Storing a number of the Caller ID list into
the Phone Directory
4
Press (ENTER).
The cursor flashes at the end of the phone number.
Enter or change the phone number, if necessary
(see page 20).
5
Press(ENTER) again.
You hear a long confirmation beep and the name and
number are stored.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should call back, you can
change the number of digits of the phone number as described on page 38.
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
1
Display the name and phone
number you want to store from
the Caller ID list (see page 33).
SMITH JOHN
1-201-123-4567
2
Confirm the number and press
(ENTER).
DIAL PGM ERASE
1-201-123-4567
3
Press 4 to make "PGM" flash
and press (ENTER).
The cursor flashes at the end of
the name.
SMITH JOH N
12011234567
Enter or change the name, if
necessary (see page 20).
SMITH JOHN
12011234567
37 EN
Caller ID Features