TZS First AUSTRIA FA-8006-3 Instruction Manual page 2

BODY FAT/HYDRATION MONITOR SCALE
INSTRUCTIONS FOR USE
Dear Customer,
Welcome to use First Austria Body Fat/Hydration Monitor Scale. This product is specially designed
to test body fat/hydration, help keep a close eye on the daily change of your body fat, hydration and
weight, providing information for your reference. Base on the analysis of your height, weight and age
etc., it tells your daily energy requirement, and helps control your weight. Please read this instruction
carefully before use.
Environment friendly disposal: You can help protect the environment! Please remember to
respect the local regulations: hand in the non-working electrical equipments to an appropriate
waste disposal center.
USER-FRIENDLY TIPS
1. During Measuring
A. The device is designed to allow auto step on. Please always ignore the first reading and only
start taking effective record from the second time weighing.
B. Always remove your shoes and socks, wipe clean your feet before using.
C. Step on the weighing platform gently.
D. It is advisable to take measurement at the same time of the day.
E. Measured result could be misleading after intensive exercise, excessive dieting or under extreme
dehydration condition.
F. Always weigh/use the scale on a hard and flat surface. When you are measuring, please keep still.
G. The measured data of the following people may have deviation:
• Children under 10 or adult over 100 (can only use the device under normal weighing mode)
• Adult over 70
• Body building athletes or other occupational athletes.
H. People with the following conditions should not use the device:
• Pregnant women
• Those with symptom of edema
• Those on dialysis treatment
• Those who use heart pacemaker or with other implanted medical device.
2. Safety Warning
A. The Fat% Hydration% content evaluated by the Fat Monitor Scale is only for reference (not for
medical purpose). If your Fat% Hydration% content is over/below normal level, please consult
your doctor for more advice.
B. Keep away from strong electro-magnetic field when using the scale.
C. It could be slippery if you weigh on a wet surface. Moreover, if the weighing platform surface is
glazed, never step on the edge of the scale and do keep balance during your weighing.
FEATURES/SPECIFICATIONS
1. Using high precision strain gauge sensor
2. Multifunction: test body fat %, body hydration, BMI and suggest calorie intake requirement.
3. Built-in memory for 12 different users
4. Optional normal weighing mode (bypassing parameter setting): Auto step on weighing and
consecutive add-on weightings
5. Low battery and overload indication
PERFORMANCE INDEX
ltem Weighing Fat%
lndex Capacity
Index Range 4.0% ~60.0%
Division 0.1kg 0.1%
0.2lb
Hydration% Calorie
27.5% ~66.0%
0.1% 1kCAL
2
TO INSTALL OR REPLACE BATTERY
The battery type of scale depends on the product structure. Find the battery type of your scale
according to the following pictures, then install and replace battery as described.
1. 1x3V CR2032 lithium batteries (included). Remove isolation sheet before use;
2. 2x1.5V (AA/AAA) batteries (excluded). Remove package foil before use;
Open the battery case cover at the bottom of scale:
A. Take out the used battery with the aid of a sharp object, as shown in picture.
B. Install new battery by putting one side of the battery beneath the battery baffle
and then pressing down the other side.
Open the battery case cover at the bottom of scale:
A. Press battery gently the battery will pop up automatically.
B. Install new battery by connecting one side of battery to the positive plate first,
and then pressing down the other side. Please observe the polarity.
Open the battery case cover at the bottom of scale:
A. Take out used batteries, with the aid of a sharp object if needed.
B. Install new batteries by putting one side of the battery down first and pressing
down the other side. (Please observe the polarity)
KEY ILLUSTRATION
SET (ON/SET): Turn on the scale and prompt to next parameter.
▲ : Advance the value by one interval each press. Continuous pressing will speed up the advance
of value.
▼
: Decrease the value by one interval each press. Continuous pressing will speed up the
decrease of value.
LCD DISPLAY
1. Gender
2. Fat%
3. Hydration%
4. BMI
5. Calorie Unit
6. Fat status indication
7. Height Unit
8. Age
9. Weight Unit
TO SET WEIGHT UNIT
If your scale is available (or applicable) in two measuring systems of Metric and
Imperial, you can set to the one you prefer by pressing the unit conversion button.
At the bottom of scale, you can find a unit conversion button as shown in picture.
Press unit conversion button to convert weigh unit when scale is power on.
Remark: The unit system of scale depends on sales destination or the requirement of distributor.
3