. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the Backup Port Configuration
The Backup Port Configuration screen shows information about the primary
and backup port and the current status of the ports. The screen also lets you add,
delete, and enable or disable the state of backup port entries.
Figure 4-5. Backup Port Configuration Screen
Adding a Backup Port Entry
To add a backup port entry, follow these steps:
1. From the Action field, move the cursor to the Primary Port entry field.
Then enter the number of the desired primary port.
2. Move the cursor to the Backup Port entry field. Then enter the number
of the desired backup port.
3. Move the cursor to the Action field and press the space bar until
Add appears.
Netelligent 2008/2016 10Base-T Repeater User Guide
4-29