Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing System Information
The System Information screen shows the primary system
identification information.
Figure 4-3. System Information Screen
You can select the following IP frame types: Ethernet II or Ethernet
802.2 SNAP.
You can select the following IPX frame types: Ethernet II, Ethernet 802.2,
Ethernet 802.3, or Ethernet 802.2 SNAP
Error Messages
The following error message can occur if there are incorrect entries:
ERROR: The field must be in the range [0...255]
The following error messages can occur if entered values are out of range:
ERROR: The value is too small
ERROR: The value is too large
Netelligent 2008/2016 10Base-T Repeater User Guide
4-27
Advertisement
Table of Contents
