Advertisement
Available languages
Available languages
Input Voltage Range: 0.7V RMS
Overload Protection: 250V DC/AC RMS
NOTE: for high measurement set the rotary
switch to ACV range then push the "HZ/Duty" key
to switch between functions.
Temperature ( º C)
Range
Accuracy
-20 º C ~ 400 º C ±(1.0% + 5 º C)
400 º C ~
±(1.5% +
1000 º C
Overload Protection: 0.5A/250V fuse
Diode and Continuity Test
Range
Pontosság
Diode
1 mV
Continuity
M
aintenance
Periodically wipe the case with a damp cloth and
mild detergent. Do not use abrasives or solvents.
Dirt or moisture in the terminals can affect
readings.
To clean the terminals:
- Turn the meter off and remove all test leads.
- Shake out any dirt that may be in the terminals.
- Soak a new swab with a cleaning and oiling
agent.
- Work the swab around in each terminal.
The oiling agent insulates the terminals from
moisture-related contamination.
Warning: To avoid electrical shock or damage to
the meter, do not get water inside the case.
Resolution
0.1 º C
1 º C
15 º C)
Leírás
Open Circuit
Voltage: 0.5~
0.8V
Open Circuit
Voltage: 0.45V,
0.1Ω
continuity
beeper max.
to 70Ω (±30Ω)
f
r
Use
eplaceMent
To replace the Meter's fuse:
1. Set rotary switch to the "OFF" position.
2. Disconnect test leads and/or any connectors
from the terminals.
3. Use a screwdriver to unscrew the four screws
secured on the battery cover.
4. Take out the battery's back cover from the
meter.
5. Remove the fuse by gently prying one end
loose, then sliding the fuse out of its bracket.
6. Install the replacement fuses only with
specified ratings: F 10A/ 250 V 0 6 × 30F
500mA/250V 05x20
7. Rejoin the battery cover and secure by the
screws.
Warning: To prevent damage or injury, replace
the fuse only with specified ratings.
Battery Replacement
Replace the battery as soon as the battery
indicator appears on the screen to avoid false
readings.
To replace the battery:
1. Set the rotary switch to the OFF position.
2. Disconnect test leads from the terminal.
3. Take out the battery's back cover from the
meter.
4. Remove the used batteries.
5. Replace the used batteries with two new 1,5V
batteries (AAA).
6. Rejoin the battery cover and secure by the
screws.
EN
User Manual
Advertisement
