Browse PC through DLNA
Access and play the pictures, audio and video files
from a computer or media server on the home
network through your home theater.
Before you start
•
Install a DLNA-compliant media server
application on your device. Make sure that
you download an application that works best
for you. For example,
•
Windows Media Player 11 or higher for
PC
•
Twonky Media Server for Mac or PC
•
Enable media sharing of files. For details,
check the user manual of the media server
software software.
1
Connect your home theater to a home
network. For better video quality, use wired
connection whenever possible.
2
Connect the computer and other DLNA-
compatible devices to the same home
network.
3
Press
(Home).
4
Select [browse PC], and then press OK.
» A content browser is displayed.
5
Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
•
If you cannot see the folders, make sure
that you enable media sharing on the
selected device so that the content is
available for sharing.
6
Select a file, and then press OK.
•
Some media files may not play due
to compatibility issues. Check the file
formats supported by your home theater.
7
Press the play buttons to control play (see
'Play buttons' on page 15).
Karaoke
Available only in selected model and region
Play a Karaoke disc on your home theater and sing
along with the music.
What you need
•
A Karaoke microphone.
•
Karaoke discs.
Caution
•
To prevent loud feedback or unexpected noise,
turn the microphone volume to the minimum
before you connect the microphone to your
home theater.
1
Connect a karaoke microphone to the MIC
connector on your home theater.
2
Switch your TV to the correct source for
your home theater.
3
Make sure that audio post processing is
enabled on your home theater (see 'Speaker
settings' on page 27).
4
While playing a karaoke disc, press
OPTIONS.
» The options menu is displayed.
5
Select [Karaoke], and then press OK.
» The karaoke setup menu is displayed.
6
Press the Navigation buttons (up/down) and
OK to change the following settings:
•
[Microphone]: Turn the microphone on
or off.
•
[Microphone volume]: Change the
microphone volume.
•
[Echo]: Change the echo level.
•
[Key]: Change the pitch to match your
voice.
EN
23