Sennheiser SPORT True Wireless Instruction Manual page 19

4. Touch and hold the touch control panel for 10 seconds until you
hear the voice prompt "Pairing" and a beep.
The LED of the earbud flashes green and red. The earbud is in ear-
bud pairing mode.
5. Now take the second earbud out of the charging case and make
sure that the right and the left earbud are close to each other
(max. distance 50 cm).
6. Touch and hold the touch control panel of the second earbud for
10 seconds until you hear the voice prompt "Pairing" and a beep.
If pairing was successful, you hear the voice prompt "Pairing suc-
cessful" and the LEDs of the earbuds flash blue 3x. The earbuds
are paired with each other and the factory default settings are
restored.
▷
Now pair the earbuds with your Bluetooth device (> 17).
1
Bluetooth off
3
5
max. 50 cm
L
L
R
2
4 Hold 10s
"Pairing"
6
Hold 10s
"Pairing"
R
SPORT True Wireless | 19
Using the earbuds
USB-C
USB-A
3x
L R
"Pairing successful"