Table of Contents
Advertisement
2.6
STORAGE SAFETY
1. Store away from areas of human activity. Do
not permit children to play on or around the
stored machine.
2. Make sure the unit is sitting, or blocked up
firm and solid and will not tip or sink into a soft
area.
3. Cover with weather - proof tarpaulin and tie
down securely.
2.7
TIRE SAFETY
1. Failure to follow proper procedures when
mounting a tire on a wheel or rim can produce
an explosion, which may result in serious injury
or death.
2. Do not attempt to mount a tire unless you
have the proper equipment and experience to
do the job.
3. Have a qualified tire dealer or repair service
perform required tire maintenance.
2.8
ASSEMBLY SAFETY
1. Assemble in an area with sufficient space to
handle the largest component and access to all
sides of machine.
2. Use only lifts, cranes, jacks, and tools, with
sufficient capacity for the load.
3. Use two people to handle the large bulky
components.
4. Do not allow spectators in the working area.
2.9
SAFETY DECALS
1. Keep safety decals and signs clean and
legible at all times.
2. Replace safety decals and signs that are
missing or have become illegible.
3. Replaced parts that displayed a safety sign
should also display the current sign.
4. Safety decals or signs are available from
your Dealer Parts Department.
HOW TO INSTALL SAFETY DECALS
1. Be sure that the installation area is clean
and dry
2. Decide on the exact position before you
remove the backing paper.
3. Remove the smallest portion of the split
backing paper.
4. Align the decal over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
5. Slowly peel back the remaining paper and
carefully smooth the remaining portion of the
decal in place.
6. Small air pockets can be pierced with a pin
and smoothed out using the piece of decal
backing paper.
7
Advertisement
Table of Contents
