1. Manuals
  2. Brands
  3. HARRISTON INDUSTRIES Manuals
  4. Tiller
  5. 2015
  6. Operator's manual

HARRISTON INDUSTRIES 2015 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INDUSTRIES
2015
2025
CULTIVATOR
OPERATORS MANUAL & PARTS BOOK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2015 and is the answer not in the manual?

Questions and answers

Summary of Contents for HARRISTON INDUSTRIES 2015

  • Page 1 INDUSTRIES 2015 2025 CULTIVATOR OPERATORS MANUAL & PARTS BOOK...
  • Page 3 CULTIVATOR WARRANTY HARRISTON INDUSTRIES, INC. (Harriston) warrants the Harriston Cultivator to be free from defects in material and workmanship, under normal use and service. Obligation under this warranty shall extend for a period of 1 year (12 months) following the date of delivery to the original purchaser and shall be limited to, at the option of Harriston, replacement or repair of any parts found, upon inspection by Harriston, to be defective.

  • Page 4: Table Of Contents

    Table of Contents 1 INTRODUCTION ........................2 2 SAFETY ..........................3 OPERATING SAFETY ....................5 MAINTENANCE SAFETY .................... 5 HYDRAULIC SAFETY ....................6 TRANSPORT SAFETY ....................6 STORAGE SAFETY ..................... 7 TIRE SAFETY ......................7 ASSEMBLY SAFETY ....................7 SAFETY DECALS ......................7 3 SETUP ............................

  • Page 5: Introduction

    1 INTRODUCTION Congratulations on your choice of a Harriston Cultivator to complement your farming operation. This equipment has been designed and manufactured to meet the needs of a discerning potato industry. Safe, efficient, and trouble-free operation of your Harriston Cultivator requires that you and anyone else who will be operating or maintaining the Cultivator read and understand all of the safety, operation, maintenance, and troubleshooting information contained in this Operator's Manual.

  • Page 6: Safety

    2 SAFETY SAFETY ALERT SYMBOL ATTENTION! This Safety Alert symbol means The Safety Alert Symbol identifies important BECOME ALERT! YOUR SAFETY IS safety messages on the Harriston Cultivator INVOLVED! and in the manual. When you see this symbol, be alert to the possibility of personal injury or death.
  • Page 7 SAFETY GENERAL SAFETY YOU are responsible for the SAFE operation and 1. Read and understand the maintenance of your Harriston Cultivator YOU Operator's Manual and all must ensure that you and anyone else who is safety signs before operating, going to operate, maintain, or work around the maintaining, or adjusting the Cultivator be familiar with the operating and Cultivator.

  • Page 8: Operating Safety

    OPERATING SAFETY MAINTENANCE SAFETY 1. Read and understand the Operator's Manual 1. Follow all the operating, maintenance, and and all safety signs before operating, servicing, safety information in the manual. adjusting, repairing, or unplugging. 2. Support the machine with blocks or safety 2.

  • Page 9: Hydraulic Safety

    HYDRAULIC SAFETY TRANSPORT SAFETY Make sure that all components in the 1. Make sure you are in compliance with all hydraulic system are kept in good condition and local regulations regarding transporting are clean. equipment on public roads and highways. 2.

  • Page 10: Storage Safety

    STORAGE SAFETY SAFETY DECALS 1. Store away from areas of human activity. Do 1. Keep safety decals and signs clean and not permit children to play on or around the legible at all times. stored machine. 2. Replace safety decals and signs that are 2.
  • Page 11 2.10 SIGN OFF FORM Harriston Industries follows the general Safety Standards specified by the American Society of Agriculture Engineers (ASAE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operating and/or maintaining the Cultivator must read and clearly understand All Safety, Operating, and Maintenance information presented in this manual.

  • Page 12: Setup

    3 SETUP THREE-POINT HITCH TOOLBAR SETUP Set the tool bar on stands approximately 30” Center the upper 3 pt. Hitch over the center high for ease in assembly. Assembly should mark on toolbar and fasten in place with u- be carried out in a flat and open area. bolts, lock washers and nuts.

  • Page 13: Gang Assembly

    GANG ASSEMBLY Attach the lower linkage to the gang frame and front mount with linkage pins and ¼” X Clamp the tine mounting tubes to the gang ½” roll pins. Insert the upper linkage frame with plates, 7/16” X 3 ½” carriage between the gang uprights and front mount, bolts, lock washers and nuts.

  • Page 14: Row Spacing

    ROW SPACING 5 Tine Gangs 3 Tine Gang (End Gang) 4 OPTIONAL EQUIPMENT TOOLBAR GAUGE WHEELS Gauge wheels are mounted to the toolbar between the first and second gangs from the outside of the toolbar. Attach the gauge wheel assembly to the front of the toolbar with u-bolts, lock washers and nuts.

  • Page 15: Steel Guide Wheels

    STEEL GUIDE WHEELS The steel guide wheels mount to toolbar with u-bolts. Center in row with assembly mounted on front of toolbar CHISEL MARKER The chisel marker mounts on your seeder or planter. Use u-bolts to mount. Mount between the two outer rows of your planter or seeder.

  • Page 16: Hiller Discs

    HILLER DISCS The hiller discs are attached to rear of cultivator gang with hiller mount. Shank and disc assembly mount to hiller mount with hiller clamp. Adjust to fit row width. SPIDER SHANKS The spider shanks are attached to rear of cultivator gang with hiller mount.

  • Page 17: Operation & Service

    5 OPERATION & SERVICE ADJUSTMENT & OPERATION Check gangs for movement. They should move up and down freely but the bolts on the parallel bars should be tight enough to eliminate excessive side sway. Adjust the tines on the gangs to give the coverage desired.

  • Page 18: Troubleshooting

    6 TROUBLESHOOTING PROBLEM CAUSE SOLUTION CULTIVATOR DRIFTING TO 3 POINT HITCH NOT CENTER HITCH ONE SIDE CENTERED DIFFERENT SIZE SHOVELS USE EQUAL QUANTITIES OF ON DIFFERENT DEPTHS SAME SIZE SHOVELS ON EACH GANG UNEVEN GROUND USE GUIDE COULTERS 3 POINT ON TRACTOR NOT ADJUST LOWER 3 POINT SQUARE LINKS ON TRACTOR UNTIL...

  • Page 19: Parts List

    3 on the accompanying table. PART NUMBER The Part number is the number by which the component may be Identified and ordered from Harriston Industries and its network of Dealers. DESCRIPTION This column contains the name and description of the part.
  • Page 20 NOTES:...
  • Page 21 Description 270210 Front Mount Weldment 200230 Lower Linkage Pin 270220 Linkage Weldment 020965 1/4” x 1-1/2” Spring Lock Pin Plated 290330 2015/25 Rear Linkage 021334 Washer 14 gauge x 7/8” 090167 1” x 7/8” Plastic Insert 095036 1/4”-28 Straight Zerk...
  • Page 22 Description 090164 Tire, 15 x 6.00 x 6NHS 4 Ply 020174 1” NC Slotted Hex Nut 082166 Tapered Bearing LM 11949 290145 Axle Pin 2015/25 096203 SE-11 Seal 020832 3/16” x 2” Cotter Pin 290131 Gauge Wheel Spacer 096203 Oil Seal...
  • Page 23 Gauge Wheel Adjusting Crank Ref. Part No. Description Ref. Part No. Description 021100 Safety Pin 095057 ¾” Acme Nut 290140 Crank Lock Weldment 290316 Crank Spacer 020423 Nut, 3/8” Centerlock 020960 Roll Pin, 3/16” x ¾” 020033 Bolt, 3/8” x 3” 021310 1/2”...
  • Page 24 Front Tube Ref. Part No. Description Ref. Part No. Description 020045 Bolt, 7/16 x 3-½” 020481 Nut, 7/16” Flange 290360 Front Tree Tube Weldment (Straight) 020504 Washer, ½” Lock 200700 Front Tree Cross Tube 020404 Nut, ½” 290223 Tree Tube Back Plate (2 Tubes) 020152 Bolt, ½”...
  • Page 25 2015 Rear Tube Ref. Part No. Description Ref. Part No. Description 290345 2015 Rear Tree Tube Weldment 020481 7/16” Serrated Flange Nut 200800 Back Cross Tree Tube 020152 1/2" x 1–3/4” Bolt 290216 Tree Tube Back Plate (1 Tube) 020504 1/2”...
  • Page 26 2025 Rear Tube Ref. Part No. Description Ref. Part No. Description 290340 2025 Rear Tree Tube Weldment 020504 1/2” Lock Washer 200800 Back Cross Tree Tube 020404 1/2” NC Nut 290216 Tree Tube Back Plate (1 Tube) 020045 7/16” x 3-1/2” Bolt 020152 1/2"...
  • Page 27 2015/25 Guide Cone Package #290001 Ref. Part No. Description Ref. Part No. Description 224100 Steel Guide Wheel Mount 020403 7/16” Hex Nut 224510 Steel Guide Wheel w/ 1-1/4” 021036 U-Bolt, 5/8" X 7" X 8 1/2" Bearings 020506 5/8” Regular Lock Washer 020514 7/16”...
  • Page 28 Stabilizer Disc Spring Loaded #229490...
  • Page 29 Stabilizer Disc Spring Loaded #229490 Ref. Part No. Description Ref. Part No. Description 229555 Cushion Disc Mount 090065 Bolt, 5/8” X 2” 229505 Stabilizer Pivot Pin 020506 Washer, 5/8” Lock 229550 Cushion Disc Frame Weldment 020406 Nut, 5/8” 229535 Disc Hub Mount 020536 Washer, 5/8”...
  • Page 30 Support Wheel Pair w/Tires #270330...
  • Page 31 Support Wheel Pair w/Tires #270330 Ref. Part No. Description Ref. Part No. Description 270348 Gauge Wheel Arm Left 095025 Seal, SE-11 270355 Gauge Wheel Arm Right 095019 Bearing LM11949 Cone 270320 Gauge Wheel Arm Weldment 020827 Cotter Pin 5/32 x 1” 021037 U-Bolt, ¾...
  • Page 32 Hiller Disc Assembly Double Bearing #211840 Ref. Part No. Description Ref. Part No. Description 211876 Dust Cap Strap 095045 Gasket 090015 Dust Cap 090024 16" Disc 020490 Castle nut 090023 14" Disc 020827 Cotter pin 211660 Hiller Shank 020517 Washer 020415 3/4"...
  • Page 33 2015 Hiller Discs Ref. Part No. Description Ref. Part No. Description 290230 2015 Disc Mount Weldment 020057 1/2 x 3-1/2” Hex Head Bolt 211930 Disc Clamp 020504 1/2” Regular Lock Washer 211840 Disc Assy. W/ Shank (Double Bearing) 020404 1/2” Hex Nut 020965 1/4 x 1-1/2”...
  • Page 34 Hiller Disc Scraper #212900 – Scraper Pair #212901 - Guess Row Mount 19 20 21 Ref. Part No. Description Ref. Part No. Description 021361 Set Screw, Square 5/16” x ¾” 212910 Scraper Mount Flat 020402 Nut, 3/8” 020515 Washer ½” Flat 020502 Washer, 3/8”...
  • Page 35 2015/25 Chisel Cleaner Ref. Part No. Description 021365 Set Screw, ½” x 1 ½” 201034 Squeeze Plate 201036 Vertical Clamp Strap 212115 Vertical S-tine 290240 Cleaner Weldment...
  • Page 36 Spider Accessories Ref. Part No. Description Ref. Part No. Description 020432 3/4" Nylock Nut 095102 Seal 211675 Spider, Right 095103 Snap Ring 095104 Hub Bushing 020094 Bolt, Hex ¾” x 6” 095101 Hub Bearing 211686 Spider Shank Weldment Left 211685 Spider Shank Weldment Right 211676 Spider, Left...
  • Page 37 Shanks & Shovel Options Ref. Part No. Description Ref. Part No. Description 212105 Heavy S-tine 212500 Shovel, 7" 201000 2-1/2" S-Tine clamp 212200 1-1/2" S-Tine Shovel 020658 Carriage bolt 1/2" X 4" 212300 Shovel, 2-3/4" 020504 1/2" Lock Washer 213800 Shovel Bolt with Nut 020404 1/2"...
  • Page 38 Hiller Wing Attachment...
  • Page 39 Hiller Wing Attachment #1547 Ref. Part No. Description Ref. Part No. Description 095139 Hiller Shovel (Ag Mate) 020053 Bolt, 1/2" x 2" NC GR #5 204055 Hiller Wing Mount Weldment 095136 Plow Hiller Blade Left 204032 Hiller Plow Shank 27" Note 095137 Plow Hiller Blade Right 204000...
  • Page 40 Culti-Weeder Accessory Ref. Part No. Description Ref. Part No. Description 110010 3” X 3” X 1/8” 20’ Tool Bar 125600 Section Angle Front 72” 128100 Culti-Weeder Mount Bracket 125700 Section Angle Center 72” 128600 1/2” X 6” Mounting Plate 125800 Section Angle Rear 72”...
  • Page 41 90° Fold Package #111750 Front Ref. Part No. Description Ref. Part No. Description 111717 Cylinder Pin 083019 ¾-16 JIC Swivel Female ½” Hose 020965 1/4” x 1-1/2” Spring Lock Pin 096290 Restrictor 111610 Hinge Pin 095009 ½” Hydraulic Hose 020967 1/4”...
  • Page 42 180° Fold Package #111755 Ref. Part No. Description Ref. Part No. Description 096126 Hyd. Cylinder, 4 x 16” 095277 ORB (3/4-16) Solid ½” Hose End 111781 4” O.D. Roller 096289 Tip, Pioneer ¾” ORB 111782 Roller Pin 9” Long 096290 Restrictor 111784 Top Pin (Single Bar)
  • Page 43 180° Fold Pkg. (Double Bar) #111760 Front Ref. Part No. Description Ref. Part No. Description 111783 Top Pin (Double Bar) 083019 ¾-16 JIC Swivel Female ½” Hose 20967 Roll Pin ¼” x 2” 096290 Restrictor 111785 Lower Pin (Double Bar) 095009 ½”...
  • Page 44 3-Point Assembly #270450 Ref. Part No. Description Ref. Part No. Description 270440 Upper 3-Point Weldment 020407 3/4” Hex Nut 270420 Lower Right 3 Point Weldment 095263 Top Link Pin Category 3 (P7711) 270430 Lower Left 3-Point Weldment 228400 Category 3 Bottom 3 Point Pin 021037 3/4”...
  • Page 45 Parking Stand #223300 Ref. Part No. Description 222500 Parking Stand Mount 222600 Parking Stand Leg 021036 U-Bolt 5/8 x 7 x 8 ½” 020868 Pin, Clevis 5/16 x 2 ½” 020506 Washer, 5/8” Lock 020406 Nut, 5/8”...
  • Page 47 Box 378, Minto, ND 58261 (800)437-8205 || (701)248-3286 Fax: (701)248-3070 harriston@invisimax.com www.harriston-mayo.com PRINTED IN USA ISSUE DATE: February 2019...

This manual is also suitable for:

2025

Table of Contents