Advertisement
Login to the switch console using default username: manager, and password: manager, and
type kill config and reboot command at the console prompt.
It will ask for the confirmation to erase the configuration. Type "Y", and the switch will delete the
configuration. The configuration is still in the memory. Reboot the switch to clear the configuration.
Type the Reboot command at the switch console, Type "Y" to Proceed on rebooting the switch,
and "N" to Do you wish to save the configuration. If you select "y" for the later one, it will save the
configuration from memory to the flash, and it will boot up with the old configuration, which you
won't be able to login, as you don't know the username and password set in the old configuration.
You can start configuring the switch again.
Quick Start Guide for Magnum 6K and 10K series switches - 7
Advertisement
