Advertisement
Once you enter the login credential, you will be see the switch management logical view with
Switch Description, Ports connected with green LEDs, IP Address, Subnet Mask, MAC
Address, Uptime,and the firmware version running in the switch at the bottom left corner
To change the default IP address of the switch, Click on the Administration tab on the left column,
and then click on system (Administration ----> System). You will see the current System
configuration Information. Click on edit, and change the IP address of the switch. Once you
change the IP address of the switch and click OK. You will lose connectivity to the switch
management access. If the IP address of the switch is in the same network 192.168.1.0, then on
the browser type new IP address of the switch, and press Enter key. You should be able to
access the switch management with the new IP address. If you change the IP address of the
switch to a different network address. You will lose connectivity to the switch management, you
will also have to change the IP address of your laptop/workstation to the same network. First thing
I would recommend to ping the new IP address of the switch from your laptop/workstation( with
new IP address). Once you login with your new IP address you will see the new IP address of the
switch in the Switch Management Logical View Window.
Quick Start Guide for Magnum 6K and 10K series switches - 3
Advertisement
