Advertisement
User Account Creation: Administration ---> User Mgmt ----> User Accounts. You can create two
level access for an user: operator and manager.
User with operator level access has read only access, can access the switch configuration, but
can not make any changes. User with a manager level access has both read-write access. He
can manage, configure, and make changes to the switch configuration. You can create user with
operator or manager level access by clicking on Add button on the page
How to Reset Magnum 6K and 10K series switches to factory Default??
To set a switch to factory default, you will need switch console access (Command Line Access).
You will need a serial console cable (null modem) to connect the console port of the switch. For
6KL and 10KT uses the same console cable, that is used in Cisco switches (blue cable with
RJ45 connector and the DB9 connector on the other end). You can use Tera Term, Hyper
Terminal, or Putty Application to access the console access. Change COM port settings for Null
Quick Start Guide for Magnum 6K and 10K series switches - 4
Advertisement
