Advertisement
Quick Links
Quick Start Guide for Magnum 6K and 10K series switches
How to get started with Magnum 6k and 10K series switches
Managed 6K or 10K series switches have a factory default IP address: 192.168.1.2, Mask:
255.255.255.0. Factory Default login: manager and password: manager
Give your laptop/workstation an IP address: 192.168.1.10 Mask:255.255.255.0 or any other
address in the same network different from the switch IP address. Connect an Ethernet cable
from your laptop or workstation to any port on the switch. After connecting the Ethernet cable try to
ping the switch IP address 192.168.1.2 from your laptop or workstation. If ping is successful, then
you have Ethernet connection to the switch.
Quick Start Guide for Magnum 6K and 10K series switches - 1
Advertisement
Related Manuals for GarettCom Magnum 6K
Summary of Contents for GarettCom Magnum 6K
- Page 1 After connecting the Ethernet cable try to ping the switch IP address 192.168.1.2 from your laptop or workstation. If ping is successful, then you have Ethernet connection to the switch. Quick Start Guide for Magnum 6K and 10K series switches - 1...
- Page 2 (not recommended) option. You will be prompted to the switch management login page Enter the default login id: manager and Password: manager Login ID: manager, Password: manager Quick Start Guide for Magnum 6K and 10K series switches - 2...
- Page 3 IP address). Once you login with your new IP address you will see the new IP address of the switch in the Switch Management Logical View Window. Quick Start Guide for Magnum 6K and 10K series switches - 3...
- Page 4 Add button on the page How to Reset Magnum 6K and 10K series switches to factory Default?? To set a switch to factory default, you will need switch console access (Command Line Access).
- Page 5 Password: manager Quick Start Guide for Magnum 6K and 10K series switches - 5...
- Page 6 One more step you have to perform before the switch is set to factory default settings. Quick Start Guide for Magnum 6K and 10K series switches - 6...
- Page 7 You can start configuring the switch again. Quick Start Guide for Magnum 6K and 10K series switches - 7...