Advertisement
IF YOU HAVE...
1. Check your hot & cold water pressure
2. Follow this flowchart to select the correct Venturi Jet for the pressure situation:
20-35kPa
Recommended for 20-35kPa
hot water supply.
COLD WATER PRESSURE:
START:
Unknown Water Pressure
Please note: Performance of the mixer will vary based on the specific pipework between your hot water source and the outlet.
INSTALLING THE VENTURI JET:
Using the Allen Key provided, screw the Venturi Jet into the inlet thread end first.
The Allen Key is a tight fit and will require a hard push to fully engage in the jet.
(A)
(B)
Patented New Zealand No. 605175
EQUAL LOW PRESSURE OR EQUAL HIGH/MAINS PRESSURE
Install product as supplied.
GREEN
JET
More than 500kPa
150 - 500kPa
UNEQUAL PRESSURE
36-75kPa
YELLOW
JET
Recommended for 36-75kPa
or greater hot water supply.
Yellow Jet
(Hot water pressure 20kPa – 130kPa)
Yellow Jet
(Hot water pressure 20kPa – 130kPa)
HOT WATER PRESSURE:
20 - 35kPa
36 - 75kPa
76 - 130kPa
(C)
76-130kPa
RED
JET
Recommended for 76-130kPa
or greater hot water supply.
Green Jet
Yellow Jet
Red Jet
IMPORTANT
Ensure the Venturi Jet
is screwed in firmly thread
end first until the mark
on the key aligns with the
end of the mixer outlet.
Please note:
Do not throw away the other
Venturi Jets as they may be
required at a later date.
Ask the homeowner to keep
with the warranty information.
Page 2
Advertisement
