Advertisement
Quick Links
PART LIST
DIMENSION
NO. 1
997MM
NO. 1a
999MM
NO. 2
997MM
NO. 2a
999MM
NO. 3
1080MM
NO. 4
1128MM
NO. 5
1263MM
NO. 6
775MM
NO. 7
1170MM
NO. 8
425MM
NO.9
1000MM
NO.10
1000MM
2X3M MEDIUM CAGE
CAGE 2M
QUANTITY
4
Box - 1
4
Box - 1
2
Box - 1
2
Box - 1
4
Box - 1
4
Box - 1
4
Box - 1
4
Box - 1
8
Box - 1
1
Box - 2
1
Box - 2
1
Box - 2
Page 1 of 7
Advertisement
Related Manuals for Feel Good 2X3M MEDIUM CAGE
Summary of Contents for Feel Good 2X3M MEDIUM CAGE
- Page 1 2X3M MEDIUM CAGE CAGE 2M PART LIST DIMENSION QUANTITY NO. 1 997MM Box - 1 NO. 1a 999MM Box - 1 NO. 2 997MM Box - 1 NO. 2a 999MM Box - 1 NO. 3 1080MM Box - 1 NO. 4...
-
Page 2: Cable Tie
NO.11 1000MM Box - 2 NO.12 1000MM Box - 2 NO. 13 400X800MM Box - 2 LOCK Box - 2 CONNECTER AND ACCESSORIE SHEET NUMBER QUANTITY Box - 1 Box - 1 Box - 1 Box - 2 Box - 2 WIRE MESH - CABLE TIE 1X20M... - Page 3 We advise having cable ties available to help keep wire mesh in place when you are fitting it. Page 3 of 7...
- Page 4 SET UP AS BELOW ILLUSTRATION STEP I – The roof components are to be built first, poles 1, and 1a, make up the sides, with poles 4 and 5 making up the front and back. Lay all roof parts on the floor and connect like below with part 14. Page 4 of 7...
- Page 5 STEP II – Inserting legs Lift up one side insert tube No.3, place part no 17 on the end of each leg. STEP III Repeat step II lift up and install the other legs. STEP IV – Create ground frame Install ground tubes as below illustration, once completed the bracing bars(part 7) can be fixed from each leg, see complete picture on page 3 for positioning.
- Page 6 STEP IV Install door to main frame as below Illustration. Screw tube 9, 10, 11,12 to the frame, the poles already contain threads to take the screws. Please screw from the top of the frame and from underneath the frame in line with holes on tube 5, screw tube 8 in the same way. STEPVI Link the net as below illustration, and put cover on last.
- Page 7 STEPVII Roof support bar installation as below illustrations. CONSTRUCTION WARNING – MUST BE FOLLOWED TO AVOID DAMAMGE WHEN USING THE OUTDOOR COVERS. Because of the flat roof the wire mesh must be pulled as tightly as possible across the top and secured around the top edge with cable ties.