Introduction - visual engineering SWZ HD User Manual

SWZ-HD July 2022

Introduction

The SWZ HD incorporates the latest developments in high definition IP camera technology.
The camera uses multiple lenses and sensors to provide a stepped zoom effect, minimising the size
requirement and maximising low light sensitivity�
The SWZ HD utilises three 1080p imaging sensors, each with a resolution of two mega pixels, these
are switched into the integrated ONVIF compliant dual H�264/MJPEG encoder�
Each sensor is paired with a lens of differing focal length, providing a high definition 10x optical
zoom from a tiny 50mm diameter package�
As standard the SWZ HD is shipped with 8, 16 & 35mm lenses, providing fields of view from 40°
down to 8°.
The simple construction of the three prime lenses increases the effective aperture, allowing far
more light to hit the sensor than would be possible with a conventional optical zoom lens�
Recording is supported by an internal 32GB micro SD card, recorded files are retrieved via FTP
transfer or through the use of VE software applications�
Camera configuration is supported via the embedded web page interface or via ONVIF VMS
Applications�
PTZ control is integrated into the Ethernet connection and can be accessed via the VE Camera
Viewer� Similar control is also possible through ONVIF compliant VMS Applications or through the
RS232/RS485 serial comms channel�
With its internal slip ring the SWZ HD offers continuous pan and 250° of tilt. The unit is mounted in
an environmentally sealed, CNC machined housing�
visualengineering.co.uk Page 4