visual engineering SWZ HD User Manual page 19

SWZ-HD July 2022
Trigger Recording
Trigger Recordings can be triggered by either motion or light level change�
Trigger recordings are disabled by default, if enabled, a recording will be made�
The duration of the recording will be the duration of the motion event plus the time set in seconds
in the trigger duration�
SD Card Management
In the event of the SD card becoming full, there are two options for Overwrite Control� One option
is to have the recordings stop when the SD card is full, or the other option is to have the oldest
material to be overwritten when the SD card becomes full�
Following any changes made in the menu the user must press the submit button � Wait until the
camera finishes re-configuring before powering off the camera.
Erase and Format
The SD card will be completely erased and formatted if the Erase button is used� The user will be
asked to confirm that this is the intention before the SD card memory card is actually erased.
visualengineering.co.uk Page 19