Operation Procedures - HOMCOM A90-279 Assembly & Instruction Manual

OPERATION PROCEDURES:

AUTO ON/OFF: The computer turns on when any key is pressed or when it receives an
input from the sensor. The computer turns off when the sensor has no signal input or if no
key is pressed for approximately 4 minutes.
RESET: The unit can be reset by changing the batteries or pressing the RESET key for 3
seconds.
FUNCTIONS:
COUNT: This function is automatically displayed on the screen at all times. It displays the
number of strides during a workout.
TIME: Press the MODE key until TIME function appears; the time of exercise will be
displayed.
CALORIES: Press the MODE key until the CAL function appears; calories burned will be
displayed.
STRIDES/MIN: Press the MODE key until STRIDES/MIN function appears; the number of
strides per minute will be displayed. It is determined based on the speed of exercise.
SCAN: Press the MODE key until the SCAN function appears; automatic display of the
following functions: STRIDES/MIN – TIME - CALORIES.
22