Table of Contents
Advertisement
ST535
F1.00
T/C: R
20°C
LOCKED
UNLOCKED
If any mimic panel lamps are on then the ST535 is firing. To stop the firing
press the ►n key.
32°C
ST535 User Handbook
Turning On
When turned on the ST535 performs a display
test by lighting all of the display segments and
illuminating all of the front panel indicator
lamps.
The version number of the software embedded
within the ST535 is now displayed. If you
need technical support you might be asked for
this code together with the serial number.
Next displayed is the thermocouple type set-
ting. This should match the type of thermo-
couple fitted to the kiln and can be R, S, K or
N type (R,S,K,N).
The final display will show the kiln temperature.
All other lamps should be off.
If pressing any key causes LOCKED to appear
then the keyboard has been locked. This is an
anti-tamper feature. Press the fn key & hold
down for 5 seconds to unlock.
This now shows that the keyboard is UN-
LOCKED. To re-lock the keyboard press the
fn key & hold down for 5 seconds.
During firing the star icon will light to show
when heating power is being applied to the
kiln.
Note: During power up the SEGMENT display shows
the operating units (°C/°F) of the ST535 (Installer
adjustable).
Page
5
Advertisement
Table of Contents
