Table of Contents
Advertisement
Element is compatible with most hands, wrists, and elbows that accept standard
analog EMG electrode inputs. The Element system is typically sold with three-
port kidney-style connectors to connect with quick-disconnect terminal devices.
Alternative connectors may be available upon request. If you have a question
about compatibility with other devices, please contact us.
For detailed information on connections and cables, refer to the Element
Connections Guide.
The Element system was developed for everyday use and must not
be used for unusual activities. These unusual activities include, for
example, sports with excessive strain and/or shocks to the wrist
unit (pushups, downhill mountain biking) or extreme sports (free
climbing, paragliding, etc.). Furthermore the Element system should
not be used for the operation of motor vehicles, heavy equipment
(e.g. construction machines), industrial machines or motor-driven
equipment.
6
2
C om po n e nt
D e scr iptio n
I B T E L E C T R O D E S
The electrodes detect and amplify raw electromyography (EMG) signals from
the user's skin. The electrodes plug into the signal processing box.
S I G N A L P R O C E S S I N G B OX
The signal processing box collects and filters the electrode EMG signals, and
outputs envelope EMG signals to the terminal device. The signal processing box
contains a Bluetooth module, which allows Element to communicate with the
desktop software.
E L E M E N T S O F T W A R E
The user can visualize EMG signals and adjust electrode gains through the
desktop software.
7
Advertisement
Table of Contents
