Software For The Hp 39G - HP 39g Master Manual

Software for the hp 39g+

At the time of writing the hp 39g+ had only
just been released and new software was in
the process of being developed. An image
of the current Windows version is shown
right but the final version may differ in
appearance, perhaps significantly.
The hp 39g+ is sold with a cable included,
unlike the earlier models. This cable lets it
link to the USB port on a PC or a Mac. The
intention is that the software being
developed should run on any platform,
including Unix, and will allow the transfer of
objects such as aplets, programs or notes.
Once the aplet or note has been transferred to a PC it can be edited using
the same ADK software as is used for the hp 38g, hp 39g and hp 40g. The
only drawback with this is that the ADK will only run on Windows machines. It
may well be that by the time you are reading this there will be new editing
software specifically for the hp 39g+ and running on other platforms. Check
the Hewlett Packard website for information on this. Information can also be
found at The HP HOME view (at http://www.hphomeview.com).
Most explanations & pictures which follow on
the next two pages apply to the Windows software.
They assume that you are using one of the earlier models
(hp 38g, hp 39g or hp 40g) using the serial port for access.
More recent software may well be available
by the time you read this.
See Hewlett Packard's web site at http://www.hp.com/calculators
203