Step 1: Removing The Door - Marvel MPBV424 Owner's Manual

Hide thumbs Also See for MPBV424:

INTEGRATED PANEL INSTALLATION

Integrated door panel installation:

If you purchased an integrated panel model, your unit is

equipped with articulated hinges to allow fully integrated

built-in installations. Custom panel thicknesses of

mm) and

⁄

" (18 mm) are accommodated.

CAUTION

It is important to use the factory provided grille that came

with the product to assure proper air flow is maintained

through the condenser. The use of a custom grille is not

recommended and will void the warranty.

Integrated panel models are designed for use with

built-in installations only. Use in freestanding instal-

lations could result in personal injury.

Step 1: Removing the Door

Open the door and loosen the screws holding the hinges to

the cabinet (2 at the top and 2 at the bottom hinge). Do not

remove the screws but loosen them enough so the hinges

can be slipped off of the screws when sliding the door to

the side.

The articulated hinges have many pinch points. Care-

fully close / collapse the hinges as soon as the door is

removed from the cabinet.

With a helper, and being careful not to scratch the cabinet

or the door, slide the door to the side about

remove the hinges and door from the unit.

WARNING

⁄

inch and

⁄

" (15

Table of Contents