Step 1: Set Your System To Test Mode; Step 2: Unplug The Control Panel’s Transformer; Step 3: Release The Keypad Cover; Step 4: Inspect The Old Battery - ADT QuickConnect Battery Instructions

Battery Instructions:
Ademco Lynx & ADT QuickConnect
Step 1:
Set your system to Test Mode. Log into your MyADT account, click on the Alarm System tab, and select
System Test.
Step 2:
Unplug the control panel's transformer from the outlet. You may need the screwdriver to remove the
retaining screw on the transformer.
Step 3:
Find the two tabs on top of your keypad, press them in to release the cover and gently pull the keypad
toward you.
Step 4:
Quickly inspect the old battery. If the battery looks abnormal (i.e. has a swollen or split case, liquid
leaking from the case, or corroded terminals) close the keypad and call (800) ADT-ASAP to schedule a
service call.