Advertisement
General Information and Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Please keep this user manual in a safe place
along with your purchase receipt and carton for future reference. If applicable, pass
these instructions and packaging on to the next owner of the appliance. Always
follow basic safety precautions and accident prevention measures when using an
electrical product.
1.
Read all instructions before using the Prinetti® Drum Fan Heater.
2.
Do not touch hot surfaces. The temperature of the outer surface can get very
hot while the Fan Heater is in operation. Allow the unit to cool completely before
moving or cleaning.
3.
Close supervision is necessary when any appliance is used by or near children.
4.
Do not use the Fan Heater for other than its intended purpose.
5.
Before turning on, ensure the electrical voltage and frequency of the circuit
corresponds to those indicated on the rating label of the appliance.
6.
To protect against the risk of electric shock, do not immerse this Fan Heater, cord
set or plug in water or any other liquid.
7.
The Fan Heater is not intended to be operated by means of an external timer or
any type of separate remote control system.
8.
The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock, or injury.
9.
This appliance is intended to be used indoors for household use only.
10. Do not use an extension cord unless completely necessary with this product. If an
extension cord is used please ensure that it has a rating equal or exceeding the
rating of this appliance.
11. Do not pull or carry by the cord, use the cord as a handle, close a door on the
cord, or pull the cord around sharp edges or corners. Keep the cord away from
heated surface.
12. Do not bend or damage the power cord.
13. Always unplug the Fan Heater when not in use. To disconnect from the power
supply, grip and pull from the power socket. Never pull by the cord. The power
plug must be removed from the power socket before cleaning, servicing,
maintenance or moving the Fan Heater.
AFTER SALES SUPPORT AU
1300 777 137 NZ
0800 824 556
service@unclebills.com.au
03
Advertisement
