Film Loading - Ricoh XR-2s Manual

FILM LOADING

Your XR-2s is designed to accept any standard 35 mm color or black and white film roll in cartridge. (12, 20,
24 or 36 exposures).
3. Swing open Back Cover (44) and place a film cartridge into Film Chamber (35) (Fig. 6).
1. First of all, press Shutter
Release Button (11) to see that
the shutter has been released.
(Refer to
"METER/SHUTTER ON/OFF
CONTROL'').
2. Pull up Film Rewind Knob
(1) until Back Cover (44) snaps
open (Fig. 5). Then, pull it out
all the way to allow for
insertion of the film cartridge.
4. Push down Film Rewind Knob (1)
to its original position by turning
Film Rewind Crank (2) clockwise or
counterclockwise so that Film
Rewind Shah (34) engages the film
cartridge and that the film cartridge
is seated in place (Fig. 7).
5. Draw the film leader across the
camera back and insert it into one of
the slits of Film Take-up Spool (43)
(Fig. 8). To bring the slit into a
convenient position, rotate Film
Take-up Spoof (43) in the direction
of arrow with your finger.