HP zx2000 Installation Instructions page 2

1
sample system board and AGP Pro/PCI card cage
4. Connect your monitor(s) to the graphics card ports as follows:
Single digital monitor - attach monitor cable to the primary port 2.
a.
b. Dual digital monitors - attach the cable of the primary monitor to the primary port.
Analog monitor - attach the monitor cable to either the primary or the secondary port 1 using the DVI-I to
c.
DB-15 dongle provided.
system board and graphics card (examples only)
5. Attach your other cables (power, peripheral, telecommunications etc.) to your workstation.
6. After you have installed the graphics card, you must install the correct ATI graphics driver.
NOTE: The ATI graphics driver for the ATI FIRE GL X1 or Z1 may already be installed on
some systems. If is not already installed, you can download the latest graphics driver from
www.hp.com/go/bizsupport. To obtain the proper driver version refer to your system
model/type. Use the AxxxxX nomenclature found on the Serial Number plate on the rear of the
workstation.
HP offers additional graphics information on www.hp.com/go/bizsupport. For other information
on ATI graphics products, visit www.ati.com.
7. Refer to the Technical Reference or Operations And Maintenance Guides for instructions on how to verify your
graphics configuration.
1
2
1