Network Con Guration Fi - KStar BluE-H5 Installation, Operation & Maintenance Manual

7.4 Network Con guration fi
After the logger is added, please con gure the network to ensure normal operation.Go fi
to "Plant Details"-"Device List", nd the target SN and click "Networking". fi
Step 1：Con rm Wi-Fi Info fi
Please make sure your phone has connected to the right WiFi network. And click "Start".
Notice
5G WiFi is not supported .
Special characters (e.g. ，；'' =" " `) in router name and password
are not supported.
75
User Manual User Manual
Step 2：Connect to AP network
Click "Go to connect" and nd the right "AP_XXXXX" network (XXXXX refers to logger
SN).If the password is required, you can nd the password on the logger body.Go back
to SOLARMAN Smart APP, after connecting to AP network.
Step 3：Auto Con guration
Please wait for a while to complete the con guration. Then system will switch to the
following page. Click "Done" to check plant data. (Usually, the data will be updated in
10 mins)
If con guration failure occurs, please check the following reason and try it again.
（1）Make sure WLAN is ON.
（2）Make sure WiFi is normal.
（3）Make sure wireless router does not implement the white-black list.
（4）Remove the special characters in Wi-Fi network.
（5）Shorten the distance between the phone and device.
（6）Try to connect to other Wi-Fi.
fi
fi
fi
fi
fi
76