Table of Contents
Advertisement
Section 3
Installation Instructions
The MIDI300V/4 Power Supply is a factory pre-installed instrument. The power
supply is ready for immediate use once it is unpacked and placed on a level,
dry bench surface that is adequately ventilated and away from sources of
direct heat.
Section 4
Operation Instructions
4.1 Control interface
There are seven buttons and four LED indicators on the faceplate.
The LED indicates the operation status of the unit.
a. Setup Mode (before pressing RUN/Start)
Each illuminated LED light shows the parameter currently selected on the
faceplate of the power supply. For example, if the voltage is selected the
VOLT LED will be illuminated.
9
Advertisement
Table of Contents
