Starting And Stopping The Run; Pausing The Run - Fisher Scientific Midi300V/4 Instruction Manual

For non-stop continuous operation, set the

4.5 Starting and stopping the run

8. Press the
the LED light will light up next to the
9. Press the
OFF using the switch at the rear of the power supply.
10. The programmed settings will be retained within power supply memory and
displayed when the power supply is next switched on.

4.6 Pausing the run

11. Press
power supply during the run, allowing access to the gel. A PAUSE
message will flash within the LCD screen, while the voltage and current will
read at zero value.
12. Press the
key to start the run. Once the electrophoresis run starts,
key to terminate a timed run, and turn the AC power
key for temporary access to the gel. This interrupts the
The LED adjacent to the
key to resume electrophoresis. The voltage and
button.
12
button to 'zero'.
will also flash.