Start The Operation - Fisher Scientific Midi300V/4 Instruction Manual

b. Operation Mode
Once the power supply is started, the LED will be illuminated on the
faceplate adjacent to the START/STOP button.
– Voltage Select
1.
– Current Select
2.
– Time Select
3.
– Increase Select
4.
– Decrease Select
5.
– Pause Program
6.
– Start/Stop Program
7.
4.2 To start the operation
Note: To operate under constant voltage or constant current modes, adjust the
other parameter to the maximum value. For example, to operate under
constant voltage, adjust the current to the maximum output of 700mA before
running the power supply with the voltage set at the desired output setting.
10