Table of Contents
Advertisement
en operation
Slide the measuring aid forwards.
2.
Fold the measuring aid down and
3.
click it into place.
Push in the detergent drawer.
4.
14.8 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 30.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Push in the detergent drawer.
4.
32
14.9 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press
.
1.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.
If
is selected, the laundry is not
2.
spun and the water is drained after
rinsing.
Notes
¡ If the laundry is not removed, the
Anti-Crease programme starts after
15 minutes. The programme takes
around 30 minutes. The display
shows 00:00 and
Press anywhere on the display to
cancel the Anti-Crease programme
and to remove the laundry.
¡ If Hot appears, the appliance cools
the laundry.
When Hot goes out, the laundry
has cooled down.
14.10 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.
14.11 Adding laundry
Press
.
1.
appears.
.
Advertisement
Table of Contents
